MeshCore & LoRa Network Map Guide

In a browser, the UA / EN switch opens the Ukrainian map or the English map. Use the LoRa node map to find MeshCore repeaters in Ukraine and around the world, inspect radio packets, and calculate terrain Line-of-Sight (LoS).

Contents

How a node appears on the map

A Companion, Repeater or Room Server can broadcast a LoRa ADVERT without internet access. When an Observer receives an advert with coordinates and forwards it to the server over MQTT or HTTPS, the node appears on the map. The packet feed shows receptions forwarded by an Observer.

To enter node details manually, sign in and open “Add Node”. Enter the name, role, region, coordinates and full MeshCore public key. A manual entry starts offline; the server must receive fresh data before the node appears in the public active layer. Confirm ownership of a physical node in the cabinet with a signed ADVERT.

If a gateway loses internet access, a computer connected to a Companion can capture received frames locally and resume forwarding new receptions once connectivity returns.

Telemetry and linking

Missing measurements show No data. Voltage can arrive separately from battery percentage. To link an unclaimed radio node, request a code in the cabinet, temporarily set it as the node name and send an ADVERT (valid for 10 minutes). Restore the previous name once linked. “Remove from map” hides the node from the public map while keeping it in your cabinet, and “Show on map” restores visibility.

In the cabinet, open your node and select “Edit telemetry” to adjust or clear readings. Measurement history and weather readings are preserved.

In the Android app, choose “Refresh via Bluetooth” in your node card, allow Nearby devices and select your Companion. The Companion queries the Repeater or Room Server over LoRa (the remote node must be in contacts, or guest/password login is used). Requires Android 6 or newer.

For automated polling through a gateway, run scripts/meshcore-telemetry-agent.py using your Observer token from the cabinet.

Boards, firmware and sensors

Open Observer in the cabinet and select the exact board model. Available roles include Companion BLE, Companion USB, Repeater, and Room Server. Ready-to-use Wi-Fi and MQTT commands are available for compatible Gessaman builds. Useful tools: MeshCore Flasher · Gessaman Observer.

BMP280 measures temperature and air pressure; BME280 also measures humidity. Connect the I²C module to 3.3 V, GND, SDA and SCL with the board powered off, and verify the sensor address (0x76 or 0x77) and firmware driver (MeshCore sensor driver · Simple Sensor).

If BME280 is attached to the Companion itself, open its cabinet card and tap “Refresh via Bluetooth” in Android. For periodic readings on a gateway, run the Python agent with --interval 300 without --target.

Map search and settings

Use Layers to open map settings and × to close them. World, Europe and Ukraine move the map. The Observer region filter changes which nodes appear. Your browser remembers language, layers, theme, filter and map view.

Markers and layers

The marker letter shows the node role and the shield shows verification status. A dashed purple circle indicates privacy radius, while the blue circle estimates range by node type. RF Links counts directed links between visible nodes active in the last 24 hours.

Radio profile (LoS)

Open LoS and select existing nodes or place pins A and B directly on the map (pins can be dragged). Switch Distance units between Kilometers (meters) and Miles (feet).

Set antenna heights above ground. At 868 MHz, green means direct path and 60% of the first Fresnel zone are clear, amber indicates partial Fresnel obstruction, and red indicates terrain obstruction. Elevations come from Copernicus DEM GLO-90 via Open-Meteo.

Packets and #Public

Packet Example opens a saved Observer reception with RSSI, SNR, radio settings and hops when available. Receptions with the same radio hash are grouped within two minutes. The receiving observer’s owner can inspect the full HEX. The #Public tab shows the latest 100 public messages.

Node visibility

The map shows nodes active in the last 24 hours. Linked nodes remain in the cabinet and reappear on the map after a new signal.

Cabinet sign-in, Android APK, GitHub & Telegram

Sign in with your map username or email and password (at least 8 characters). A session lasts 24 hours; changing your password ends earlier sessions. Under Profile & Security, you can link GitHub or Telegram sign-in.

In the Android app, tap the version number or “APK” in the header to compare your installed version with the latest downloadable APK.